HP 275 HP BladeSystem p-Class Server Blade Enclosure, HP BladeSystem p-Class Power Enclosures

QuickSpecs

HP ProLiant BL25p Server Blade

Overview

At A Glance

Performance dual processor server blade designed with enterprise availability HP ProLiant BL25p server blade includes:

AMD Opteron 200 series single and dual-core processors (dual capability)

Models 275 (2.2GHz), 270 (2.0GHz), 265 (1.8GHz), 252 (2.6GHz) and 250 (2.4GHz) HP ProLiant BL25p Dual Port Fibre Channel Adapter (2-Gb) option for SAN connectivity AMD 8131 and 8111 Chipsets

1024-MB or 2048-MB PC3200 Registered ECC 400MHz DDR memory, (2 x 1 Interleaved Memory), expandable to 16 GB Five total network adapters:

Four PCI-X Gigabit Server NICs (embedded) with WOL and PXE (two single-port NC7781 and one dual-port NC7782)

Plus one additional 10/100 NIC dedicated to iLO Management

Smart Array 6i (integrated on system board Controller with optional battery-backed write cache) Wide Ultra320 SCSI Drive Cage standard supports up to two 1" Wide Ultra320 hot plug hard drives Integrated Lights-Out (iLO) Advanced Management (ASIC on motherboard)

Plugs vertically into 6U enclosure, 8 BL25p server blades per enclosure

Cisco Gigabit Ethernet Switch Module (CGESM) option for Gigabit Ethernet network adapter consolidation. Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides

HP BladeSystem p-Class Server Blade Enclosure:

Server blades and interconnects blind mate into server blade enclosures for network connection and power Server blade enclosure is 6U and holds up to 8 HP ProLiant BL25p server blades and 2 interconnects

Types of interconnects available: GbE Interconnect Switches, GbE2 and CGESM Interconnect Switches with optional Fibre Channel pass through, Patch Panels or Patch Panel 2 with Fibre Channel pass through

HP BladeSystem p-Class Power Enclosures:

Use BL p-Class sizing tool to determine power based on your configuration

http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls.

BL p-Class power enclosure provides shared, external, redundant power

Choose the HP BladeSystem p-Class 3U power enclosure or the HP BladeSystem p-Class 1U power enclosure Choose single-phase or three-phase power

HP BladeSystem power enclosures with power supplies are not needed if using facility -48VDC ± 10%, in this case purchase facility DC option kit

HP BladeSystem p-Class Power Distribution (only required with the 3U power enclosure):

Distributes power from the power enclosure to the server blade enclosures

Four power distribution choices:

BL p-Class scalable bus bar

BL p-Class mini bus bar

BL p-Class power bus box

Dual power input kit for mini bus bar (required for support of two power enclosures)

HP ProLiant BL25p server blade, and p-Class server blade enclosure, interconnects and power enclosure protected by a limited three year warranty with optional service uplifts available

NOTE: Power requirements for a HP BladeSystem p-Class-: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.

DA - 12160 North America — Version 7 — June 27, 2005 Page 2