HP 275 manual Configuration Information Factory Integrated Models, Configurable Model ships with

QuickSpecs

HP ProLiant BL25p Server Blade

Configuration Information Factory Integrated Models

NOTE: HP does not allow factory integration of options into standard models listed above.

Configure-to-order servers must start with a CTO Chassis.

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.

Step 1: Base Server Blade Configuration

ModelsHP ProLiant BL25p CTO Blade382731-405

Configurable Model ships with:

One additional 10/100 NIC dedicated to iLO Management Four Gigabit NICs (embedded) with WOL and PXE

NOTE: Two can be upgraded to multifunction network adapters) One additional 10/100 NIC dedicated to iLO Management

Step 2: Choose Required Options (one of the following from each list unless otherwise noted):

Processors	HP BL25p 0265 1.8GHz DC FIO Base	392444-L21
	HP BL25p 0270 2.0GHz DC FIO Base	392442-L21
	HP BL25p 0275 2.2GHz DC FIO Base	392440-L21
	HP BL25p O252 2.6GHz SC FIO Base	381588-L21
	HP BL25p O250 2.4GHz SC FIO Base	381587-L21
	For dual processor configurations choose one of the above FIO choices, plus one of
	the matching option kits below:
	HP BL25p Opteron 2.2GHz-1M DC Processor Option Kit	392440-B21
	HP BL25p Opteron 2.0GHz-1M DC Processor Option Kit	392442-B21
	HP BL25p Opteron 1.8GHz-1M DC Processor Option Kit	392444-B21
	HP BL25p Opteron 2.6GHz-1M SC Processor Option Kit	381588-B21
	HP BL25p Opteron 2.4GHz-1M SC Processor Option Kit	381587-B21
Memory	NOTE: Two-way memory interleaving is enabled when an identical pair of DIMMs is
	installed.
	1GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)	376638-B21
	NOTE: Must install in pairs
	2GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB)	376639-B21
	4GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 2 GB)	379300-B21
	NOTE: Must install in pairs
Communications	HP ProLiant BL25/35/45p NIC Mezz FIO Base	382850-B21

Step 3: Choose Additional Factory Integratable Options

Fibre Channel Options FC Adapter Card BL25p/45p 381881-B21

Step 4: Choose Additional Options for Factory Integration

NOTE: For additional options, including server blade enclosure with enhanced backplanes, interconnect options and power subsystem options, please refer to the "Options" section below.

DA - 12160 North America — Version 7 — June 27, 2005 Page 23