Enable/disable the ExpressCard slot. Enable/disable the Smart card slot. Enable/disable the eSATA port.
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables MultiBay devices and ExpressCard devices on the advanced port replicator.

Select

To do this

 

 

 

Built-In Device Options

●

Enable/disable the wireless button state (enabled by

 

 

default).

 

●

Enable/disable embedded WWAN device radio (select

 

 

models only; enabled by default).

 

●

Enable/disable embedded WLAN device radio (select

 

 

models only; enabled by default).

 

●

Enable/disable the embedded Bluetooth device radio

 

 

(enabled by default).

 

●

Enable/disable the network interface controller (enabled

 

 

by default).

 

●

Enable/disable LAN/WLAN switching (disabled by

 

 

default).

 

●

Set the wake on LAN state. Options include the

 

 

following:

 

 

◦

Disabled

 

 

◦

Boot to Network

 

 

◦

Follow Boot Order

 

●

Enable/disable the ambient light sensor.

 

●

Enable/disable the fingerprint device (enabled by

 

 

default).

 

●

Enable/disable the integrated camera (enabled by

 

 

default).

 

●

Enable/disable the power monitor circuit (enabled by

 

 

default).

 

●

Enable/disable the audio device (enabled by default).

 

●

Enable/disable a modem device (enabled by default).

 

●

Enable/disable the microphone (enabled by default).

 

●

Enable/disable the internal speakers (enabled by

 

 

default).

 

 

 

Port Options

NOTE:

All port options are enabled by default.

● Enable/disable the flash media reader.

●

● Enable/disable the 1394 port.

●

●

●

92 Chapter 5 Computer Setup