Smart card reader

Description

Spare part number

 

 

Smart card reader

597839-001

 

 

Before removing the smart card reader, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the following components:

a.Remove the battery (see Battery on page 43)

b.Remove the service access cover (see Service access cover on page 44)

c.Remove the WLAN module (see WLAN module on page 50)

d.Remove the WWAN module (see WWAN module on page 53)

e.Remove the keyboard (see Keyboard on page 55)

f.Remove the top cover (see Top cover on page 60)

g.Remove the display assembly (see Display assembly on page 66)

h.System board shield (see System board shield on page 69)

Remove the smart card reader:

1.Position the computer right-side up, with the front toward you.

2.Disconnect the smart card reader cable from the ZIF connector (1) on the system board and remove the cable (2).

78

Chapter 4 Removal and replacement procedures