2.Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot.
Reverse this procedure to install a secondary memory module.
Top cover
The top cover kit includes the TouchPad board and capacitive board.
Description | Spare part number |
|
|
Top cover | |
|
|
Before removing the top cover, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the following components:
a.Remove the battery (see Battery on page 43)
b.Remove the service access cover (see Service access cover on page 44)
60 | Chapter 4 Removal and replacement procedures |