f.Remove the top cover (see Top cover on page 60)

g.Remove the display assembly (see Display assembly on page 66) Remove the system board shield:

1.Position the computer right-side up, with the front toward you.

2.Remove the four Phillips M2.5×3.0 screws (1) and (2) that secure the shield to the base enclosure.

3.Slide the shield from the computer (3).

WARNING! Use caution when handling the system shield as the object may be hot.

Reverse this procedure to install the system board shield.

NOTE: When installing a replacement system board shield, take care that the tab labeled “Watch Out” is inserted correctly under the heat sink so that the keyboard lies flat when replaced.

Modem module

NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 649758-001. See Cable Kit on page 25 for more Cable Kit spare part number information.

Description

Spare part number

 

 

Modem module

628824-001

 

 

70

Chapter 4 Removal and replacement procedures