HP 2760p manual

8.Disconnect the display cable (3) from the system board.

CAUTION: Support the display assembly when removing the display screws in the following step. Failure to support the display assembly can result in damage to the assembly and other components.

9.Remove the two Phillips M2.5x6.0 screws (1) that secure the display assembly to the base enclosure.

10.Gently rotate the display (2) and swivel it at a 90-degree angle to gain access to the remaining screws in the display bracket.

11.Remove the two Phillips M2.5 x 6.0 screws (3) that secure the display bracket to the base enclosure.

68 Chapter 4 Removal and replacement procedures