12.Lift the display straight up to remove it from the base enclosure (4).
Reverse this procedure to reassemble and install the display assembly.
System board shield
Description | Spare part number |
|
|
System board shield | |
|
|
Before removing the system board shield, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the following components:
a.Remove the battery (see Battery on page 43)
b.Remove the service access cover (see Service access cover on page 44)
c.Remove the WLAN module (see WLAN module on page 50)
d.Remove the WWAN module (see WWAN module on page 53)
e.Remove the keyboard (see Keyboard on page 55)
Component replacement procedures | 69 |