Security
Entering and Displaying System Information
1.To open Computer Setup, turn on or restart the notebook. Press F10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen.
❏To change the language, press F2.
❏For navigation instructions, press F1.
2.Access or set your preference(s) by following these directions:
❏To view general system information, select File menu > System Information.
❏To view or enter identification values for system components, select Security menu > System IDs.
❏To enable or disable the reporting of the processor serial number by the processor to software, select Advanced menu > Device Options.
❏To specify how the notebook recognizes multiple, identical port replicators that are identically equipped, select Advanced menu > Device Options.
◆To set the notebook to recognize the port replicators as a single port replicator, select Disable.
◆To set the notebook to recognize the port replicators individually by serial number, select Enable.
3.To confirm the information or your preferences, press F10.
4.To save your information or preferences, use the arrow keys to select File > Save Changes and Exit, then follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and are in effect when the notebook restarts.
Software Guide |
