Setup and Diagnostic Utilities
Selecting from the Tools Menu
Select | To Do This |
|
|
HDD Self Test Options | Run a quick or comprehensive self test on |
| any hard drive in the system. |
|
|
Selecting from the Advanced Menu
Select | To Do This |
|
|
Language (or press F2) | Change the Computer Setup language. |
|
|
Boot Options | Enable/disable: |
| ■ QuickBoot, which starts the notebook more |
| quickly by eliminating some startup tests. |
| (If you suspect a memory failure and want |
| to test memory automatically during |
| startup, disable QuickBoot.) |
| ■ MultiBoot, which sets a startup sequence |
| that can include most bootable devices and |
| media in the system. For instructions, refer |
| to in this guide to the “MultiBoot” section. |
|
|
Device Options | ■ Enable/disable Num lock mode at startup. |
| ■ Enable/disable multiple standard pointing |
| devices at startup. (To set the notebook to |
| support only a single, usually nonstandard, |
| pointing device at startup, select Disable.) |
| ■ Select a parallel port mode: EPP |
| (Enhanced Parallel Port), standard, |
| bidirectional, or ECP (Enhanced |
| Capabilities Port). |
|
|
| continued |
Software Guide |