HP 3325A, 3325B manual Spectrum Analyzer

TB 9-6625-2049-35

5.Accessories Required. The accessories required for this calibration are common usage accessories, issued as indicated in paragraph 4 above, and are not listed in this calibration procedure. The following peculiar accessory is also required for this calibration: 50Ω feedthrough termination, Hewlett-Packard, Model 11048C.

Table 2. Minimum Specifications of Equipment Required

			Manufacturer and model
Common name	Minimum use specifications		(part number)
AUDIO ANALYZER	Output: 4.5 V, 10 kHz		Boonton, Model 1120-S/10
	AM distortion: ≤-30 dB at 10 kHz Distortion:		(MIS-35954/2)
	≤-60 dB at 50 Hz
FREQUENCY COUNTER	Range: 99,9950 μs to 60,000,300 Hz		Hewlett-Packard, Model 5345A
	Accuracy:	1.25 x 10-8	(MIS-28754/1 Type 1)
	Capability: Time interval A to B
MEASURING RECEIVER	Frequency: 100 kHz to 10 MHz		Consisting	of	: Measuring
	Volts: .683 to .732 V rms		receiver	Hewlett-Packard,
	Accuracy: ±0.85%		Model 8902A		and Sensor
	AM: 0 to 80%		module Hewlett-Packard, Model
			11722A
MULTIMETER	Range: -20.225 to +20.225 V dc		Hewlett-Packard, Model
	Accuracy: ±0.05%		3458A
	Range: 0.3416 to 20.4 V ac
	100 Hz to 100 kHz
	Accuracy: ±0.3%
OSCILLOSCOPE	Frequency: 1 kHz to 10 MHz		Tektronix, Type 2430A
	Amplitude:	1.8 to 2.2 V p-p	(OS-291/G)
	Accuracy: ±2.5%
	Capabilities
	Duty cycle: 49.7 to 50.3%
	Overshoot: 5%
	Rise time and fall time: <20 ns
SPECTRUM ANALYZER	Frequency:	50 kHz to 20 MHz	(AN/USM-489A(V)1)
	Input: -20 dBm and 40 V
	Display capability: <-65 dBc
SYNTHESIZER/LEVEL	Frequency:	0.1 MHz	Hewlett-Packard, Model
GENERATOR	Amplitude: 13 dBm		3335AOPT 001-K06
			(MIS-35938)
TIME FREQUENCY	Reference output frequency: 10 MHz		Autek Systems Corporation,
WORKSTATION	Accuracy: ±5 x 10-8		Model 620 (MIS-38946)
RESISTANCE STANDARD	Range: 470Ω		Biddle Gray, Model 71-631
			(7910328)

5