HP 39g+ Graphing manual To draw a box, Draw keys

To draw a box	1. In Sketch view, press	and move the cursor to
	where you want any corner of the box to be.

2.Press .

3.Move the cursor to mark the opposite corner for the box. You can adjust the size of the box by moving the cursor.

4.Press to finish the box.

To draw a circle 1. In Sketch view, press and move the cursor to where you want the center of the circle to be.

2.Press . This turns on circle drawing.

3.Move the cursor the distance of the radius.

4.Press to draw the circle.

DRAW keys

Key	Meaning
	Dot on. Turns pixels on as the cursor
	moves.
	Dot off. Turns pixels off as the cursor
	moves.
	Draws a line from the cursor’s starting
	position to the cursor’s current position.
	Press	when you have finished. You
	can draw a line at any angle.
	Draws a box from the cursor’s starting
	position to the cursor’s current position.
	Press	when you have finished.
	Draws a circle with the cursor’s starting
	position as the center. The radius is the
	distance between the cursor’s starting
	and ending position. Press		to draw
	the circle.

15-4 Notes and sketches