Step 2: Connect the computer to external power
✎Powercountry.cords and AC outlets vary in appearance by region and
To connect the computer to external AC power:
1.Plug the AC adapter into the power connector 1 on the computer.
2.Plug the power cord into the AC adapter 2.
3.Plug the other end of the power cord into an AC outlet 3.
When the computer receives AC power, the battery begins to charge and the battery light (on the front of the computer) turns on. When the battery is fully charged, the battery light turns off.
Leave the computer connected to external power until the battery is fully charged and the battery light turns off.
✎A partially charged new battery can run the computer after software setup is complete, but battery charge displays will not be accurate until the new battery has been fully charged.
Getting Started |