Understanding the battery

1

2

1Battery – Supplies power to the printer.

2Battery release slider – Slides to release the battery.

Installing the battery

You can install the battery with the printer turned on or off.

1Slide the battery into the battery slot at an angle as shown in the following illustration, until the battery is flushed with the contacts. This also slides the battery contact cover open.

2Push the battery into the battery slot until the battery clicks into place.

Charging and using the battery

Fully recharge the battery before using. The battery is normally warm while it is charging. Do not charge it in a briefcase or other confined space as this may cause the battery to overheat.

The AC adapter is normally warm to the touch when plugged into an AC outlet.

1Install the battery.

2Plug in the AC adapter and turn on the printer. The Battery charge LED is green while charging, and turns off when the battery is fully charged.

After the battery is fully charged, you can use the printer without connecting to the AC power supply.

1-10

ENWW