Power LED, Resume LED, Left and Right print cartridge LEDs on.
New firmware is being flashed to the printer.
No action required.
Power LED on, Resume LED blinks, | Ink service module almost full. |
Right print cartridge LED turns on | If you have a replacement for the ink service module, |
twice as long as off. | replace it immediately by following the instructions that |
| come with it. |
Otherwise, visit www.hp.com/support/dj450 or see
|
| Customer Support to get a replacement. |
|
| In the meantime, you can press the RESUME BUTTON to |
|
| continue printing, but this LED error state will remain |
|
| until the ink service module is replaced. When the ink |
|
| service module is full, the printer will stop printing. |
|
|
|
Power LED on, Resume LED on, Right | Ink service module full. | |
print cartridge LED turns on twice as | If you have a replacement for the ink service module, | |
long as off. | replace it immediately by following the instructions that | |
|
| come with it. |
|
| Otherwise, visit www.hp.com/support/dj450 or see |
|
| |
|
| Customer Support to get a replacement. |
|
| In the meantime, you can remove the black print |
|
| cartridge and print using only the |
|
| The color results and print speed may be affected. See |
|
| |
|
|
|
Infrared LED on. | Printer is receiving infrared transmission. | |
|
| No action required. |
Power LED, Resume LED, Left and Right print cartridge LEDs cycle at fast rate.
Printer error.
Press the RESUME BUTTON to print the error code. Press the POWER BUTTON to reset the printer.
ENWW |