9.If it is necessary to replace the webcam module (shown in the following image) or microphone module from the display enclosure, disconnect the cable from the module (1), and then gently pull the module away from the
The webcam module is available using spare part number
The microphone module is removed using the same procedure and is available using spare part number
10.If it is necessary to replace the display panel, remove the four Phillips PM2.5×5.0 screws (1) at the bottom and two Phillips PM2.5×5.0 broadhead screws (2) at the top that secure the panel to the display enclosure.
11.Rotate the top of the panel upward (3).
The display panel is available using the following spare part numbers:
●
●
●
●
