Use the printer’s control panel (for printers with a supported control panel) to configure basic network parameters on the print server. See Appendix C for more information.
For TCP/IP networks, use an advanced configuration method, such as BootP, DHCP, Telnet, or the “arp” and “ping” commands.
MENUS
+ XXXXXXXXXX
+ XXXXXXXXXXXX
+XXXXXXXX
?
P | s |
|
- |
| |
ot | p |
|
o | r |
|
a |
| |
B |
|
|
|
| t |
P |
| e |
n | ||
C | l |
|
e |
| |
H | T |
|
D |
|
|
|
|
|
Use HP printer management software (such as HP Web Jetadmin) or other network utilities to configure network parameters. HP printer setup and management software can be downloaded from HP’s online support at:
http://www.hp.com/support/net_printing
Note | After the print server is configured with network |
| parameters, the configuration values are saved and |
| maintained even after the printer is turned off and |
| back on again. |
|
|
ENWW | Installation Procedures 16 |
