Table
| Menu Item | Description |
|
|
|
| CFG IPX/SPX= | Selects whether you want to access the IPX/SPX menu |
|
| and set IPX/SPX protocol parameters. |
|
| NO (default): Bypass the IPX/SPX menu items. |
|
| YES: Access the IPX/SPX menu items. |
|
| In the IPX/SPX menu, you can specify the Frame Type |
|
| parameter used on your network. |
|
| AUTO (default) will automatically set and limit the frame |
|
| type to the first one detected. |
|
| For Ethernet cards, frame type selections include |
|
| EN_8023, EN_II, EN_8022, EN_SNAP. |
|
|
|
| CFG LINK= | Selects whether you want to manually configure the |
|
| HP Jetdirect print server’s network link. |
|
| NO (default): Bypass the link configuration menu |
|
| items. |
|
| YES: Access the link configuration menu items. |
|
| One of the following link configurations can be set: |
|
| AUTO (default): The print server will automatically |
|
| configure itself to match the network’s link speed and |
|
| communication mode. If it fails, 10T HALF or 100T HALF |
|
| is set. |
|
| 10T HALF: 10 Mbps, |
|
| 10T FULL: 10 Mbps, |
|
| 100T HALF: 100 Mbps, |
|
| 100T FULL: 100 Mbps, |
|
|
|
| WEB= | For configuration management, specify whether the |
|
| embedded Web server will accept communications |
|
| using HTTPS (Secure HTTP) only, or both HTTP and |
|
| HTTPS. |
|
| HTTPS: For secure, encrypted communications, |
|
| only HTTPS access is accepted. The print server |
|
| will appear as a secure site. |
|
| HTTP/HTTPS: Access using either HTTP or |
|
| HTTPS is permitted. |
|
|
|
| SECURITY= | Specify whether the current security settings on the print |
|
| server will be saved or reset to factory defaults. |
|
| KEEP (default): The current security settings are |
|
| maintained. |
|
| RESET: Security settings are reset to factory |
|
| defaults. |
|
|
|
|
|
|
ENWW | HP Jetdirect EIO Control Panel Menus 38 |
