Resetting to Factory Defaults

You can restore default values by performing a cold reset on your printer (see your printer documentation for instructions).

To perform a cold reset on some older HP LaserJet printers, turn off the printer and then press and hold the Go, Start, or Pause/Resume button as you turn the printer back on.

To perform a cold reset on many recent HP LaserJet printers and MFPs, you must interrupt the printer’s power-on sequence to enter the printer service menu, and then select Cold Reset.

A document that describes how to perform a cold reset on many HP printers is available on HP’s Web site. To view the document, visit HP online support at:

http://www.hp.com/go/support

and search for document file hpj02300.html.

CAUTION A cold reset restores both your printer and Jetdirect configuration to their factory default values.

Controlling Network Protocols

The HP Jetdirect print server can simultaneously support multiple network communication protocols. This allows network computers that may be using different protocols to communicate with the same printer.

Each protocol used on the print server may require some configuration before the printer can communicate on the network. For some protocols, required parameters are automatically sensed and user-specified settings are not needed. However, for other protocols, there may be many parameters to configure.

ENWW

Troubleshooting Tools 24

Page 24
Image 24
HP 620n Fast Ethernet Print Server manual Resetting to Factory Defaults, Controlling Network Protocols