Table
Menu Item | Options | Description of settings |
|
|
|
SECURE |
| For configuration management, specify |
WEB |
| whether the embedded Web server will |
|
| accept communications using HTTPS |
|
| (Secure HTTP) only, or both HTTP and |
|
| HTTPS. |
|
| HTTPS REQUIRED: For secure, |
|
| encrypted communications, only |
|
| HTTPS access is accepted. The print |
|
| server will appear as a secure site. |
|
| HTTPS OPTIONAL: Access using |
|
| either HTTP or HTTPS is permitted. |
|
|
|
RESET |
| Specify whether the current security |
SECURITY |
| settings on the print server will be saved |
|
| or reset to factory defaults. |
|
| NO (default): The current security |
|
| settings are maintained. |
|
| YES: Security settings are reset to |
|
| factory defaults. |
|
|
|
LINK |
| Selects the network link speed and |
SPEED |
| communication mode for the print server. |
|
| For proper communications, the Jetdirect |
|
| settings must match the network. |
|
| AUTO (default): The print server will |
|
| automatically configure itself to |
|
| match the network’s link speed and |
|
| communication mode. If it fails, 10T |
|
| HALF or 100T HALF is set. |
|
| 10T HALF: 10 Mbps, |
|
| operation. |
|
| 10T FULL: 10 Mbps, |
|
| operation. |
|
| 100T HALF: 100 Mbps, |
|
| operation |
|
| 100T FULL: 100 Mbps, |
|
| operation |
|
|
|
ENWW | HP Jetdirect EIO Control Panel Menus 43 |