Computer Setup—Security

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 3-4Computer Setup—Security

Option

Description

 

 

Setup Password

Allows you to set and enable a setup (administrator) password.

 

NOTE: If the setup password is set, it is required to change Computer Setup options, flash the

 

ROM, and make changes to certain plug and play settings under Windows.

 

 

Power-On Password

Allows you to set and enable a power-on password. The power-on password prompt appears

 

after a power cycle or reboot. If the user does not enter the correct power-on password, the unit

 

will not boot.

Password Options

(This selection appears only if a power-on password or setup password is set.)

Allows you to enable/disable:

Lock Legacy Resources (determines whether or not Windows Device Manager is allowed to change resource settings for serial and parallel ports).

Setup Browse Mode (appears if a setup password is set) (allows viewing, but not changing, the F10 Setup Options without entering setup password). Default is enabled.

Password prompt on F9 & F12 (requires setup password to use these boot functions). Default is enabled.

 

Network Server Mode. Default is disabled.

 

 

Smart Cover

Allows you to:

 

Lock/unlock the Cover Lock.

 

Set the Cover Removal Sensor to Disable/Notify User/Setup Password.

 

NOTE: Notify User alerts the user that the sensor has detected that the cover has been

 

removed. Setup Password requires that the setup password be entered to boot the computer if

 

the sensor detects that the cover has been removed.

 

 

Device Security

Allows you to set Device Available/Device Hidden (default is Device Available) for:

 

Embedded security device

 

System audio

 

USB controller (varies by model)

 

Network controller

 

 

NOTE: You must disable AMT before trying to hide the network controller.

 

Serial port

 

Parallel port

 

SATA ports (varies by model)

 

 

USB Security

Allows you to set Enabled/Disabled (default is Enabled) for:

 

Front USB Ports

 

Rear USB Ports

 

Accessory USB Ports

 

 

 

Computer Setup (F10) Utilities 13