Using device lock

The device lock feature allows you to lock your HP iPAQ to prevent any accidental key press when travelling. This feature allows you to quickly lock and unlock your HP iPAQ, from the Today screen, without a password.

NOTE: If this feature is not displayed on the Today screen, tap Start > Settings > Personal > Today > Items, select the Device Lock check box, and then tap ok.

To lock your HP iPAQ:

▲On the Today screen, tap Device unlocked. To unlock your HP iPAQ:

1.Tap Unlock at the bottom-left corner of the screen or press the left softkey.

2.Tap Unlock at the center-right corner of the screen.

TIP: If you decide to keep your HP iPAQ locked, tap Cancel or press the left softkey.

Battery saving tips

You can adjust the settings on your HP iPAQ to fit your individual needs and to help your battery last as long as possible between charges. Here are some recommendations to conserve battery life:

●Connect to AC power – Leave your HP iPAQ connected to AC power at all possible times when not using it. HP also offers a variety of accessories to keep your HP iPAQ charged when you are out of the office for extended time periods. These include the mini-USB synchronization cable and travel adapter.

Important: Always use original HP batteries and chargers to charge your HP iPAQ.

●Disable Sounds – Every time you are notified of an event, battery power is consumed. Tap Start > Settings > Personal > Sounds & Notifications to turn off any unnecessary notifications.

●Auto Turn Off the Backlight – Tap Start > Settings > System > Backlight. Specify a short amount of wait before turning off the backlight. On the Battery Power tab, set Turn off backlight if device is not used for to 10 seconds.

●Turn off Bluetooth and Wi-Fi– Always turn off Bluetooth and Wi-Fi when not in use. To turn off Bluetooth and Wi-Fi, tap Start > Settings > Connections > Wireless Manager, and then tap the respective option to turn it off.

●Reduce push e-mail synchronization frequency – Every time your HP iPAQ uses push e-mail to send and receive e-mail, your HP iPAQ drains the battery. You should increase the duration between synchronization cycles to reduce the number of times your HP iPAQ syncs with the e-mail server. To change the duration, see Change e-mail download options

on page 60.

●Adjust ActiveSync settings – When ActiveSync receives updates, it uses your HP iPAQ's cellular radio to connect to an Exchange Server, which consumes battery power.

To check the battery power, tap Start > Settings > System > Power or tap (Battery) icon on the Today screen.

NOTE: In case of a battery drain out, you will lose any unsaved data on your HP iPAQ. Please ensure that your HP iPAQ is adequately charged at all times.

Using device lock 19