●TCP/IP settings

●Host name or IP address of the VPN server To set up a VPN server connection:

1.Tap Start > Settings > Connections > Connections > Tasks.

2.Under My Work Network, tap Add a new VPN server connection and follow the instructions in the New Connection wizard.

3.Under most circumstances, you should not change any advanced settings. However, you need to change advanced settings when:

●The server to which you are connecting does not use dynamically-assigned addresses, and you need to enter your TCP/IP settings.

●You need to change server DNS or WINS settings.

If either of these circumstances applies, from the My VPN screen, tap Advanced and fill in the appropriate information. Tap ok to save the changes and return to the My VPN screen.

4.To view additional information for any screen in the wizard or while changing settings, tap Help.

Change a connection group name

Your HP iPAQ is already set up with two groups of connection settings: My ISP and My Work Network. You can also change the name of these groups. For example, if you put all of your corporate settings under My Work Network Connections, you can change the name to your company’s name.

To change a connection group name:

1.Tap Start > Settings > Connections > Connections.

2.Under My ISP or My Work Network, tap Add a new modem connection to create a new connection.

3.After you create a new connection, under My ISP or My Work Network, tap Manage existing connections.

4.Tap General.

5.Enter a name for the settings group and tap ok.

End a connection

It is advised that you disconnect active connections on your HP iPAQ when not in use. This can save connection charges.

●When connected via cable, detach your HP iPAQ from the cable.

●When connected via Bluetooth, tap Start > Settings > Connections > Wireless Manager. Next, tap Bluetooth to turn Bluetooth off.

Advanced settings 87