To connect to a computer via Bluetooth using ActiveSync:

1.Follow the instructions in synchronization software help on the computer for configuring Bluetooth on your computer to support ActiveSync.

2.On your HP iPAQ, tap Start > Programs > ActiveSync.

3.Tap Menu > Connect via Bluetooth. Make sure the HP iPAQ and computer are within close range.

4.If this is the first time you have connected to this computer via Bluetooth, complete the Bluetooth wizard on your HP iPAQ and set up a Bluetooth partnership with the computer.

5.Tap Sync.

6.When finished, tap Menu > Disconnect Bluetooth.

TIP: To preserve battery power, turn off Bluetooth.

To connect to a computer via Bluetooth using WMDC:

1.Follow the instructions in synchronization software help on the computer for configuring Bluetooth.

2.On your HP iPAQ, tap Start > Programs > ActiveSync.

3.Tap Menu > Connect via Bluetooth. Make sure the HP iPAQ and computer are within close range.

4.When prompted, if you would like to set up a partnership, tap Yes.

5.On the computer, when prompted that a Bluetooth device is attempting to connect with the computer, click To allow this connection.

6.To disconnect, tap Menu > Disconnect.

Create, end, and accept a Bluetooth partnership

You can exchange information between your HP iPAQ and another device that has Bluetooth capabilities. For this, you will have to first create a Bluetooth partnership between the two devices.

NOTE: To exchange information between two Bluetooth-enabled devices, make sure Bluetooth is turned on, on both devices. The devices need to be in the discoverable mode.

To create a Bluetooth partnership:

1.Tap Start > Settings > Connections > Bluetooth.

2.Tap Add new device…. Your HP iPAQ searches for other devices with Bluetooth capabilities and displays them in the list.

3.Tap the name of the other device, and then tap Next.

4.If you want to set a passcode, which is recommended for enhanced security, enter an alphanumeric passcode between 1 and 16 characters in the Passcode box, and then tap Next. Else, leave the passcode blank, and tap Next.

NOTE: For creating partnerships with cellular phones, it is mandatory that you provide a numeric passcode.

5.Enter the same passcode on the other device.

6.Tap Done.

Bluetooth 77