HP BL30p Server Blades BL30p Model, For 1GB Total Memory choose a or B, For 4GB Total Memory

QuickSpecs

HP ProLiant BL30p Server Blade

Configuration Information - Factory Integrated Models (North America only)

NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact.

NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.

Step 1: Base Server Blade Configuration

Model HP ProLiant BL30p Configurable Model (North America) 367243-405

Configurable Model ships with:

-Two embedded NC7781 PCI-X Gigabit NICs plus one 10/100T NIC for iLO

-Integrated Lights-Out (iLO) Management with Advanced Pack features

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Processor	Intel Xeon 3.06GHz/512-KB cache Processor Kit (option)	354053-L21
	NOTE: If 2 processors are desired, select one 354053-L21and one 354053-B21
	Intel Xeon 3.2GHz/533-1M cache Processor Kit (option)	368273-L21
	NOTE: If 2 processors are desired, select one 368273-L21and one 368273-B21
	Intel Xeon 3.2GHz/533-2M cache Processor Kit (option)	364306-L21
	NOTE: If 2 processors are desired, select one 364306-L21and one 364306-B21
Memory	NOTE: Two-way interleaving memory is enabled when an identical pair of DIMMs is
	installed.
	For 1GB Total Memory choose A or B:
	A) 2 x 512 MB PC2100 DDR SDRAM DIMMs	300679-B21
	B) 1 x 1GB PC2100 DDR SDRAM DIMM	287497-B21
	For 2GB Total Memory choose two:
	1 x 1GB PC2100 DDR SDRAM DIMM	287497-B21
	For 4GB Total Memory:
	2 x 2048MB PC2100 DDR SDRAM DIMM 2x2048	300682-B21

Step 3: Choose Additional Options for Factory Integration

Hard Drive	ATA Hard Drive Kit for ProLiant BL35p and ProLiant BL30p, 2.5" parallel ATA drive,	354052-B21
	60GB, 5400 rpm
Fibre Channel Option	Dual-Port Fibre Channel Adapter (2-Gb) Kit for HP ProLiant BL30p or HP ProLiant	354054-B21

BL35p server blades

NOTE: For additional options, including HP BladeSystem p-Class blade sleeve, enhanced server blade enclosure, interconnect options and power subsystem options, please refer to the "Options" section below.

DA - 11958 Worldwide — Version 19 — August 15, 2005 Page 24