B - Ethernet

a. Locate your Ethernet/network cable.

b. Remove the yellow plug from the back of the device. c. Connect one end of the Ethernet/network cable to the

Ethernet port on the back of the device.

d. Connect the other end of the Ethernet/network cable to the router (not in the Internet port).

e. Go to Section D of this Setup Guide to install your software.

Important: Your computer and the HP All-in-One must be on the same active, working network.

If you are using a DSL or cable modem, make sure you do not connect the Ethernet/network cable from the HP All-in-One to the cable modem. Connect it to the router only.

10 • HP Photosmart C6300 All-in-One series

Page 10
Image 10
HP C6340, C6380, C6350 manual Ethernet