6.Clean only the copper-colored contacts.

Maintain the HP All-in-One

1Copper-colored contacts

7.Place the ink cartridge back into the empty slot and press down on the gray latch until it clicks into place.

8.Repeat if necessary for the other ink cartridges.

9.Gently close the ink cartridge door.

Remove ink from your skin and clothing

Follow these instructions to remove ink from your skin and clothing:

Surface

Remedy

 

 

 

 

 

Skin

Wash the area with an abrasive soap.

 

 

 

 

 

White fabric

Wash the fabric in cold water and use chlorine bleach.

 

 

 

 

 

Color fabric

Wash the fabric in cold water and use sudsy ammonia.

 

 

 

 

 

 

 

 

 

CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric.

Reduce energy consumption when the HP All-in-One is off

When the HP All-in-One is off, an amount of energy is still being consumed. Energy consumption can be lessened by enabling the Federal Energy Management Program (FEMP) mode.

NOTE: When the HP All-in-One is in FEMP mode, it will take longer than usual to turn back on.

To enable FEMP mode

Press and hold the On button for 3 seconds until the HP All-in-One turns off.

Reduce energy consumption when the HP All-in-One is off

141