HP Photosmart C8100, L2526A Setup, NOTE:, Setup, NOTE:, Network, Network, •10-Full, •10-Half, Automatic, •100-Full, •100-Half, Automatic, •Automatic, Finish setup, Related topics

To print the wireless test report

1.Touch Setup on the display.

2.Touch Network.

NOTE: If the menu option you want is not visible on the screen, touch or

to scroll through all the menu options.

3.Touch Wireless Network Test. The Wireless Network Test prints.

Related topics

“Network troubleshooting” on page 158

Change advanced network settings from the control panel settings

The advanced network settings are provided for your convenience. However, unless you are an advanced user, you should not change any of these settings.

This section contains the following topics:

•Set link speed

•Change IP settings

Finish setup

Set link speed

You can change the speed at which data is transmitted over the network. The default is Automatic.

To set link speed

1.Touch Setup on the display.

2.Touch Network.

NOTE: If the menu option you want is not visible on the screen, touch or

to scroll through all the menu options.

3.Touch Advanced Setup.4.Touch Set Link Speed.

5.Touch the link speed that matches your network hardware.

•Automatic•10-Full•10-Half•100-Full•100-HalfChange IP settings

The default setting for the IP settings is Automatic, which sets the IP settings automatically. However, if you are an advanced user, you might want to manually change the IP address, subnet mask, or the default gateway. To see the IP address and subnet mask of the HP All-in-One, print a network configuration page from the HP All-in-One.

Connect to a network 43