Computer Setup (F10) Utility Guide
Computer Setup (Continued)
Heading | Option | Description |
|
|
|
Storage | SCSI Narrow | Allows you to configure SCSI termination on |
(continued) | Termination | the external SCSI connector for narrow SCSI |
| (This feature is | drives. This feature should only be enabled |
| if you are using a narrow SCSI drive to | |
| supported on select | |
| terminate the external SCSI channel. | |
| models only.) | |
|
| |
|
|
|
| Boot Order | Allows you to specify the order in which |
|
| attached peripheral devices (such as a |
|
| diskette drive, hard drive, optical drive, or |
|
| network interface card) are checked for a |
|
| bootable operating system image. Each |
|
| device on the list may be individually |
|
| excluded from or included for consideration |
|
| as a bootable operating system source. |
|
| ✎ |
|
| may not apply after a |
|
| operating system has started. |
|
| To boot one time from a device other than |
|
| the default device specified in Boot Order, |
|
| restart the computer and press F9 when the |
|
| F10 = Setup message appears on the |
|
| screen. When POST is completed, a list of |
|
| bootable devices is displayed. Use the |
|
| arrow keys to select a device and press the |
|
| Enter key. |
Support for Computer Setup options may vary depending on your specific hardware configuration.
10 | Computer Setup (F10) Utility Guide |
