QuickSpecs
HP ProLiant DL160 Generation 5
Configuration Information - Factory Integrated Models
NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector.
Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted)
Power Supply | HP High Efficiency Power Supply Kit, FIO | |
| NOTE: Selection of the HE Power Supply Unit will remove the 650 Watt |
|
| standard power supply and requires the purchase of Power Supply Backplane |
|
| (p/n |
|
| HP Power Supply Backplane, FIO | |
| NOTE: This backplane must be ordered with the High Efficiency Power Supply |
|
| (P/N |
|
|
|
|
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 | Page 18 |