QuickSpecs
HP ProLiant DL160 Generation 5
Technical Specifications
System Unit | Dimensions (H x W x D) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) | ||
| (with bezel) |
|
|
| Weight | Maximum | 37.00 lb (16.78 kg) |
| (approximate) | (all hard drives, power |
|
|
| supplies, and processors |
|
|
| installed) |
|
|
| Minimum | 30.00 lb (13.69 kg) |
|
| (one hard drive, power |
|
|
| supply, and processor |
|
|
| installed) |
|
| Input Requirements | Rated Line Voltage | 90 to 140 VAC |
| (per power supply) |
| 180 to 264 VAC |
|
| Rated Input Current | 7.31A at 115VAC |
|
|
| 3.6A at 230VAC |
|
| Rated Input Frequency | 47 to 63 Hz |
|
| Rated Input Power | 855W (at 100 VAC), |
|
|
| 840.72W (at 200 VAC) |
| Power Specifications | To review typical system power ratings use the Power Calculator which | |
|
| is available via the online tool located at URL: | |
|
| http://h30099.www3.hp.com/configurator/calc/Power% | |
|
| 20Calculator%20Catalog.xls | |
|
| - Click on the system of interest. Example: DL160 G5 | |
|
| - Follow the instructions of the next screens. | |
| Power Supply Output | Rated | 653.10W (at 100 VAC), |
| (per power supply) | Power | 653.08W (at 200 VAC) |
| System Inlet | Operating | 50° to 95° F (10° to 35° C) at sea level with an |
| Temperature |
| altitude derating of 1.8°F per every 1000 ft |
|
|
| (1.0°C per every 305 m) above sea level to a |
|
|
| maximum of 10,000 ft (3050 m), no direct |
|
|
| sustained sunlight. Maximum rate of change |
|
|
| is 18°F/hr (10°C/hr). The upper limit may be |
|
|
| limited by the type and number of options |
|
|
| installed. |
|
|
| System performance may be reduced if |
|
|
| operating with a fan fault or above 86°F |
|
|
| (30°C). |
|
| 40° to 140° F | |
|
|
| Maximum rate of change is 36°F/hr (20°C/hr). |
| Relative Humidity | Operating | 10% to 85% relative humidity (Rh), 82.4°F |
|
| (28°C) maximum wet bulb temperature, non- | |
|
|
| condensing. |
|
| 10% to 95% relative humidity (Rh), 101.7°F | |
|
|
| (38.7°C) maximum wet bulb temperature, |
|
|
| |
| Altitude | Operating | 10,000 ft (3050 m). This value may be limited |
|
|
| by the type and number of options installed. |
|
|
| Maximum allowable altitude change rate is |
|
|
| 1500 ft/min (457 m/min). |
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 | Page 37 |
