HP DL160 manual Acoustic Noise Emissions Classification EMC, Height, Width, Depth, Interface

QuickSpecs

HP ProLiant DL160 Generation 5

Technical Specifications

Acoustic Noise

Emissions

Classification (EMC)

Non-operating	30,000 ft (9144 m). Maximum allowable
	altitude change rate is 1500 ft/min (457
	m/min).

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

Idle
LWAd	6.86
LpAm	52.36dBA
Operating
LWAd	6.89
LpAm	52.60dBA
FCC Rating	Class A
Normative Standards	CISPR 22; EN55022; EN55024; FCC CFR 47,
	Pt 15; ICES-003; CNS13438; GB9254;
	K22;K24; EN 61000-3-2; EN 61000-3-3; EN
	60950-1; IEC 60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

Non-Hot Plug SATA	160-GB 7.2K
Hard Drives	458947-B21

Capacity	160,041 MB
Height	1.028 in (2.61 cm)
Width	4.0 in (10.16 cm)
Depth	5.787 in (147.0 mm)
Interface	SATA ATA
Transfer Rate	1.5Gb/s
Synchronous
(Maximum)
Seek Time (typical	Single Track	0.9 ms
reads, including settling)	Average	9.0 ms
	Full-Stroke	17.8 ms
	Rotational Speed	7,200 rpm
Physical Configuration Bytes/Sector		512
	Logical Blocks	312,581,808

Operating Temperature41° to 131° F (5° to 55° C)

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 Page 38