HP RM-500 LAN Local Area Network configuration menu, External Servers optional, Network Setup

SmartShare® User Manual

External Servers (optional)

NTP Server

If the system time must be synchronized with an external NTP server, its host name or IP address can be set.

The default configuration is: (empty)

LAN (Local Area Network) configuration menu

Network Setup

The router name must be set. Optionally a domain name can be configured. This information is used by the built-in DHCP server (if enabled) to configure clients on the LAN using DHCP for automatic IP configuration.

The default router name is: router

The default domain name is: local

IP Address Range

The IP address range must be set. This information is used to distribute the bandwidth among the active users and by the built-in DHCP server (if enabled) to configure clients on the LAN using DHCP for automatic IP configuration.

The default IP address range is: 192.168.2.1-192.168.2.255

Local DNS Servers (optional)

If there are any DNS servers on the LAN, their IP addresses can be set. This information (in addition to the DNS server information from the WAN) is used by the built-in DHCP server (if enabled) to configure clients on the LAN using DHCP for automatic IP configuration.

The default configuration is: (empty)

Local NTP Server (optional)

If there is an NTP server on the LAN, its IP address can be set. This information is used by the built-in DHCP server (if enabled) to configure clients on the LAN using DHCP for automatic IP configuration.

The default configuration is: (empty)

Built-in DHCP Server

If enabled, the built-in DHCP server automatically configures clients on the LAN using DHCP for automatic IP configuration.

The default configuration is: Enabled

– 10 –