HP DV6 manual When to create restore points, Create a system restore point

When to create restore points

●Before you add or extensively modify software or hardware

●Periodically, whenever the system is performing optimally

NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.

Create a system restore point

1.Select Start > Control Panel > System and Maintenance > System.

2.In the left pane, click System Protection.

3.Click the System Protection tab.

4.Under Automatic restore points, select the disk for which you want to create a restore point.

5.Click Create.

The System Protection window opens.

6.Follow the on-screen instructions.

Restore to a previous date and time

To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps:

1.Select Start > Control Panel > System and Maintenance > System.

2.In the left pane, click System protection.

3.Click the System Protection tab.

4.Click the System Restore button, and then click Next. The System Restore window opens.

5.Follow the on-screen instructions.

142 Chapter 8 Backup and Recovery