HP DV6 manual Bluetooth module

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is available using spare part number 489822-001.

Description	Spare part number
Bluetooth module	483113-001

Before removing the Bluetooth module, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer.

4.Remove the battery (see Battery on page 54).

5.Remove the switch cover and keyboard (see Switch cover and keyboard on page 70).

Remove the Bluetooth module:

1.Remove the Phillips PM2.0×3.0 screw (1) that secures the Bluetooth module to the top cover.

2.Release the Bluetooth module (2) as far from the top cover as the Bluetooth module cable allows.

3.Disconnect the Bluetooth module cable (3) from the Bluetooth module.

4.Remove the Bluetooth module.

Reverse this procedure to install the Bluetooth module.

88 Chapter 4 Removal and replacement procedures