HP DV6 manual Remove the display assembly

2.Remove the WLAN antenna cables from the clip (3) built into the top cover.

CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.

3.Remove the four Phillips PM2.5×6.5 screws (1) that secure the display assembly to the computer.

4.Remove the display assembly (2).

NOTE: Steps 5 through 22 provide display assembly internal component removal information for computer models equipped with AntiGlare display assemblies. See steps 23 through 33 for display assembly internal component removal information for computer models equipped with BrightView display assemblies.

NOTE: See Webcam/microphone module on page 55 for webcam/microphone module replacement instructions for computer models equipped with BrightView display assemblies.

76 Chapter 4 Removal and replacement procedures