HP DV6 manual Top cover, a. Hard drive see Hard drive on page

Top cover

NOTE: The top cover spare part kit includes TouchPad and TouchPad buttons, and speaker assembly.

Description	Spare part number
For use only with computer models equipped with a fingerprint reader, Onyx	512828-001
For use only with computer models not equipped with a fingerprint reader, Onyx	511888-001
For use only with computer models equipped with a fingerprint reader, Moonlight White	518108-001
For use only with computer models not equipped with a fingerprint reader, Moonlight White	518109-001
For use only with computer models equipped with a fingerprint reader, Espresso Black	518788-001
For use only with computer models not equipped with a fingerprint reader, Espresso Black	518789-001

Before removing the top cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 54).

5.Remove the following components:

a.Hard drive (see Hard drive on page 63)

b.Optical drive (see Optical drive on page 57)

c.Switch cover and keyboard (see Switch cover and keyboard on page 70)

d.Display assembly (see Display assembly on page 75)

Remove the top cover:

1.Turn the computer upside down, with the front toward you.

2.Remove the 9 Phillips PM2.5×6.5 screws (1) that secure the top cover to the computer.

Component replacement procedures 85