HP DV6 Turn the computer right-side up, with the front toward you, TouchPad cable, Speaker cable

3.Remove one Phillips PM2.5×4.0 screw (2) that secures the top cover to the computer. This screw is in the battery bay.

4.Turn the computer right-side up, with the front toward you.

5.Disconnect the following cables from the system board:

(1) TouchPad cable

NOTE: On computer models equipped with a standard display assembly, this cable connects to a ZIF connector on the system board. On computer models equipped with a Flush Glass display assembly, this cable connects to a LIF connector on the system board.

(2)Fingerprint reader board cable

NOTE: This cable connects to a LIF connector on the system board.

(3)Speaker cable

NOTE: Step 6 applies only to computer models equipped with standard display assemblies.

86 Chapter 4 Removal and replacement procedures