Manuals / HP / Computer Equipment / Personal Computer

HP DV6 manual Two Phillips PM2.5×6.5 screws, Component replacement procedures

Models: DV6

1 170
Download 170 pages 17.06 Kb
Page 89
Image 89
(2)Two Phillips PM2.5×6.5 screws.

23.If it is necessary to replace the display bezel or any of the display assembly internal components, remove the following screw covers and screws:

(1)Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers are included in the Display Rubber Kit, spare part number 512361-001.

(2)Two Phillips PM2.5×6.5 screws.

24.Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.

25.Remove the display bezel (4). The display bezel is available using spare part number 512359-001 (16-inch display) or 512364-001 (15.6-inch display).

26.If it is necessary to replace the display inverter, release the display inverter (1) as far from the display enclosure as the display panel cable and backlight cable allow.

Component replacement procedures 81

Page 88 Page 90
Page 89
Image 89
HP DV6 manual Two Phillips PM2.5×6.5 screws, Component replacement procedures
Page 88 Page 90