9.In the KMIP Server Configuration screen, enter the IP address or
To verify access to the KMIP servers, click Connectivity Check.
10.In the KMIP Partition Enablement screen, select KMIP Enabled to configure partitions for use with KMIP, and then click Next.
11.The Setup Summary screen displays the settings that were collected by the wizard. Verify that the settings are correct and that there are no errors in the Done column. If you need to modify any settings or fix any issues, either click Back to reach the applicable screen or Cancel out of the wizard to fix the issues and return later.
If the settings are correct and there are no errors, click Finish.
