connecting power
Turn your television on. If you hooked up the audio to your stereo system, turn your stereo system on as well. Tune them both to the proper mode to match the audio and video connectors attached to the receiver.
Insert the small end of the power adapter cable into the power connection on the back of the media receiver. Make sure it is connected firmly.
Plug the power adapter into a working electrical outlet.
setup wizard
When power is applied for the first time, the setup wizard will appear.
Use the remote control to set up your hp digital media receiver. The setup wizard allows you to assign a name and quickly configure your network settings.
Once you have successfully completed the wizard, your media receiver will be ready to use!
Note: You can run the setup wizard again if you wish to change any of your settings. On the main screen, press the options button, highlight Run Setup Wizard, and press select.
8hp digital media receiver