HP EN 5000 Media Receiver, EW 5000 Media Receiver off, Key, Note:, Key #1, Key #2, Key #3, Key #4, Encryption, right arrow, 64 (40) Bit, 128 (104) Bit, Apply Changes, 1.Press options, Wireless Encryption

WEP is supported in both infrastructure and ad hoc mode. For WEP to work properly, you must use the same encryption level and keys on all your PCs, access points, and media receivers. Check the WEP settings on your access point or PC, then write down the encryption level and WEP keys.

To configure the media receiver for WEP:

1.Press options

2.Select Network Setup

3.Highlight Wireless Encryption and press the right arrow

4.Select Encryption and choose off, 64 (40) Bit, or 128 (104) Bit.

5.Select Key #1 and enter the WEP key. An onscreen keyboard will appear for entering the key. Entering the colon separator : is optional.

6.Enter Key #2, Key #3, and Key #4 if needed

7.Press the left arrow to exit the encryption options

8.Select Apply Changes to apply the network changes

Some network devices allow the use of a text passphrase for the WEP key. After you enter the passphrase on that device, view the encryption keys that were generated. Write down the keys and enter them into the Key fields on the media receiver.

Note: If you have trouble connecting to the media server after enabling WEP, verify you have entered the keys correctly. The keys can be long and input errors are easy to make.

user’s guide 43