12.If it is necessary to replace the wireless antenna cables and transceivers:

a.Release the wireless antenna transceivers (1) from the display enclosure. (The wireless antenna transceivers are attached to the display enclosure with double-sided tape.)

b.Release the wireless antenna cables from the clips (2) built into the display enclosure.

c.Remove the wireless antenna cables and transceivers (3). The wireless antenna cables and transceivers are available in the Antenna Kit, spare part number 681968-001.

13.If it is necessary to replace the display speakers:

a.Release the display speaker cables from the clips (1) and routing channels built into the display enclosure. Remove the Phillips PM2.0×3.0 screw (1) that secures the display speakers to the display enclosure.

98

Chapter 4 Removal and replacement procedures