c.Keyboard (see Keyboard on page 59)

d.Top cover (see Top cover on page 63)

e.System board (see System board on page 77)

f.Fan/heat sink assembly (see Fan/heat sink assembly on page 81) Remove the processor:

1.Turn the system board upside down, with the front toward you.

2.Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise (2), until you hear a click.

3.Lift the processor (3) straight up, and remove it.

NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the processor socket when you install the processor.

Reverse this procedure to install the processor.

Component replacement procedures

87