Subwoofer
Description | Spare part number |
|
|
Subwoofer (includes subwoofer cable, front speaker passthrough cable, and 2 rubber isolators) | |
|
|
Before removing the subwoofer, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 47), and then remove the following components:
a.Hard drive (see Hard drive on page 48)
b.Optical drive (see Optical drive on page 53)
c.Keyboard (see Keyboard on page 59)
d.Top cover (see Top cover on page 63)
e.System board (see System board on page 77)
Remove the subwoofer:
1.Release the subwoofer cables (1) from the clips (2) and routing channel built into the base enclosure.
2.Remove the two Phillips PM2.5×10.0 screws (1) that secure the subwoofer to the base enclosure.
Component replacement procedures | 89 |