HP FN037UAABA manual n. System board see System board on page, l. Top cover see Top cover on page

j.Processor heat sink (see Processor heat sink on page 66)

k.Display assembly (see Display assembly on page 70)

l.Top cover (see Top cover on page 78)

m.Speaker assembly (see Speaker assembly on page 83)

n.System board (see System board on page 85)

Remove the ExpressCard assembly:

1.Turn the system board upside down, with the ExpressCard eject button toward you.

2.Lift the Mylar covering up (1) to expose the screws that secure the assembly to the system board.

3.Remove the two Phillips PM2.0×6.0 screws (2) that secure the ExpressCard assembly to the system board.

4.Turn the system board right-side up.

5.Remove the two Phillips PM2.0×7.0 screws (1) that secure the ExpressCard assembly to the system board.

Component replacement procedures 89