HP FN038UAABA, FN037UAABA manual Turn the computer right-side up, with the front toward you

2.Loosen the four Phillips PM2.5×9.0 captive screws that secure the keyboard to the computer.

3.Turn the computer right-side up, with the front toward you.

4.Lift the upper right corner of the keyboard (1) and swing the rear of the keyboard up (2).

5.Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board.

56 Chapter 4 Removal and replacement procedures