HP FN037UAABA, FN038UAABA manual Enable/disable secondary battery fast charge enabled by

Select	To do this
		NOTE: Availability of the options above varies by
		computer model.
	●	Enable/disable secondary battery fast charge (enabled by
		default).
	●	Enable/disable HP QuickLook 2 (enabled by default).
	●	Enable/disable Virtualization Technology (select models
		only; disabled by default).
	●	Enable/disable TXT (Intel Trusted Execution Technology)
		(select models only; disabled by default).
	●	Enable/disable Dual Core CPU (select models only;
		enabled by default).
	●	Enable/Disable Unified Extensible Firmware Interface
		(UEFI) mode (disabled by default).
Built-In Device Options	●	Enable/disable the wireless button state (enabled by
		default).
	●	Enable/disable embedded WWAN device radio (select
		models only; enabled by default).
	●	Enable/disable embedded Bluetooth device radio
		(enabled by default).
	●	Enable/disable the Network Interface Controller (LAN)
		(enabled by default).
	●	Set the wake on LAN state. Options include the
		following:
		◦	Disabled
		◦	Boot to Network (set by default)
		◦	Follow Boot Order
	●	Enable/disable the fingerprint device (enabled by
		default).
	●	Enable/disable a modem device (enabled by default).
	●	Enable/disable the embedded WLAN device (enabled by
		default).
	●	Enable/disable LAN/WLAN switching (disabled by
		default).
	●	Enable the ambient light sensor (enabled by default).
	●	Enable/disable the Notebook Multibay device (enabled by
		default).
	●	Enable/disable the integrated camera (select models
		only; enabled by default).

Computer Setup menus 97