Hard drive/SSD drive

NOTE: The hard drive spare part kit does not include the hard drive bracket, connector, or screws.

The solid-state drive spare part kit includes the Hard Drive Hardware Kit, which includes the bracket, connector, and screws..

Description

Spare part number

 

 

Hard drive (does not include hard drive bracket or screws):

 

 

 

500-GB, 7200-rpm, 7-mm SED

703268-001

 

 

500-GB, 7200-rpm, 7-mm

703267-001

 

 

320-GB, 7200-rpm, 9.5-mm

603783-001

 

 

Solid-state drive (includes bracket, connector, and screws):

 

 

 

256-GB, SATA III, self-encrypting drive (SED)

702865-001

 

 

180-GB, SATA III

702864-001

 

 

mSATA SSD:

 

 

 

256-GB mSATA

702866-001

 

 

32-GB mSATA

702867-001

 

 

24-GB mSATA

702868-001

 

 

Hard Drive Hardware Kit (includes hard drive bracket, connector, and screws)

702870-001

 

 

Before removing the hard drive, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 40).

5.Remove the hard drive cover (see Hard drive cover on page 45).

Remove the hard drive:

1.Loosen the 4 captive hard drive screws (1) that secure the drive to the computer.

2.Pull the hard drive tab (2) upward to disconnect the hard drive.

46 Chapter 4 Removal and replacement procedures