Speaker assembly
Description | Spare part number |
|
|
Speaker assembly (includes cable) | |
|
|
Before removing the speaker assembly, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 40), and then remove the following components:
a.Hard drive cover (see Hard drive cover on page 45)
b.Hard drive (see Hard drive/SSD drive on page 46)
c.Service cover (see Service cover on page 51)
d.Keyboard (see Keyboard on page 58)
e.Base enclosure (see Base enclosure on page 61)
f.Fan (see Fan on page 66)
g.System board (see System board on page 67)
Remove the speaker assembly:
1.Remove the 2 Phillips PM2.0×3.0 screws (1) that secure each speaker to the computer.
2.Remove the speakers (2) from the computer.
72 Chapter 4 Removal and replacement procedures
